/Documentation
Assembly Guide

DC-Link Capacitor Module Mounting

Mount the assembled DC-link capacitor module onto the bottom stack in the Chassis Size 2 power stage.

Supported by
Mouser ElectronicsMitsubishi ElectricSendCutSend

Document Information

Document IDOV-C2-AG-08-DCCAP-MNT
Version0.1
Date2026-08-17
Applies tochassis-size-2
Product lineopenvvvf
Normative referencesOV-C2-AG-INDEX
Index / Hardware / Power Stages / Chassis Size 2 / Assembly Guide / DC-Link Capacitor Module Mounting / DC-Link Capacitor Module Mounting
OV-C2-AG-08-DCCAP-MNT · v0.1 · 2026-08-17Download PDF
DoctypeAssembly Guide
Doc idOV-C2-AG-08-DCCAP-MNT
Product lineopenvvvf
Applies tochassis-size-2
Version0.1
Date2026-08-17
DescriptionMount the assembled DC-link capacitor module onto the bottom stack in the Chassis Size 2 power stage.
Nav order231
PlaceholderTrue
Normative refsOV-C2-AG-INDEX
Placeholder / Under Revision - This page is incomplete or out of date and will be revised.

DC-Link Capacitor Module Mounting

This chapter will cover mounting the assembled DC-link capacitor module (DC-Link Capacitor Module Assembly) onto the bottom stack assembly and making the bus-bar connections. It is currently being written. The build is in progress and photographs are being taken.

Safety
- Do not power the inverter until all assembly, torque, and inspection steps are complete.
- Wear clean, lint-free gloves when handling bus bars and high-current contact surfaces.