/Documentation
Assembly Guide

Final Control Assembly

Complete the control-side wiring and final control assembly of the Chassis Size 2 power stage.

Supported by
Mouser ElectronicsMitsubishi ElectricSendCutSend

Document Information

Document IDOV-C2-AG-12-FCA
Version0.1
Date2026-08-17
Applies tochassis-size-2
Product lineopenvvvf
Normative referencesOV-C2-AG-INDEX
Index / Hardware / Power Stages / Chassis Size 2 / Assembly Guide / Final Control Assembly / Final Control Assembly
OV-C2-AG-12-FCA · v0.1 · 2026-08-17Download PDF
DoctypeAssembly Guide
Doc idOV-C2-AG-12-FCA
Product lineopenvvvf
Applies tochassis-size-2
Version0.1
Date2026-08-17
DescriptionComplete the control-side wiring and final control assembly of the Chassis Size 2 power stage.
Nav order235
PlaceholderTrue
Normative refsOV-C2-AG-INDEX
Placeholder / Under Revision - This page is incomplete or out of date and will be revised.

Final Control Assembly

This chapter will cover completing the control-side wiring (gate-drive, current-sense, and temperature-sense connections) and closing out the final control assembly. It is currently being written. The build is in progress and photographs are being taken.

Safety
- Do not power the inverter until all assembly, torque, and inspection steps are complete.
- Review the hazard analysis (OV-SAF-HARA-CORE) before starting.