/Documentation
Assembly Guide

Current Sense Wiring Harness

Build the current-sense wiring harness connecting the phase current sensors to the control assembly.

Supported by
Mouser ElectronicsMitsubishi ElectricSendCutSend

Document Information

Document IDOV-C2-AG-11-CSWH
Version0.1
Date2026-08-17
Applies tochassis-size-2
Product lineopenvvvf
Normative referencesOV-C2-AG-INDEX
Index / Hardware / Power Stages / Chassis Size 2 / Assembly Guide / Current Sense Wiring Harness / Current Sense Wiring Harness
OV-C2-AG-11-CSWH · v0.1 · 2026-08-17Download PDF
DoctypeAssembly Guide
Doc idOV-C2-AG-11-CSWH
Product lineopenvvvf
Applies tochassis-size-2
Version0.1
Date2026-08-17
DescriptionBuild the current-sense wiring harness connecting the phase current sensors to the control assembly.
Nav order234
PlaceholderTrue
Normative refsOV-C2-AG-INDEX
Placeholder / Under Revision - This page is incomplete or out of date and will be revised.

Current Sense Wiring Harness

This chapter will cover building the current-sense wiring harness that connects the phase current sensors to the control assembly. It is currently being written. The build is in progress and photographs are being taken.

Safety
- Do not power the inverter until all assembly, torque, and inspection steps are complete.
- Review the hazard analysis (OV-SAF-HARA-CORE) before starting.